• LocationCheltenham, Gloucestershire, Bath Road, GL53 7JT**
  • Our Working HoursOpening times: 24 hours a day*
  • Phone Us!Free phone: 0800 051 8637

Free Phone : 0800 051 8637

We Can Help Today!

Express Cheltenham glaziers replace glass for a variety of reasons. we provide an emergency response service for broken glass repairs where we would board the windows for your security and then replace the glass usually within 48 hours in and around the Cheltenham area.

Glass in Cheltenham commercial properties that should be but doesnt meet safety requirements can be replaced with safety glass. All enquiries are welcome with free estimates and quotes by phoning our Cheltenham team.

Glass for use in Cheltenham domestic properties typically comes in two varieties; single or double-glazed, with a choice of either float/annealed or toughened glass. Single-glazed windows with float glass can normally be fitted on the same day. Our Cheltenham glaziers are able to replace glass from either the outside or the inside of properties, if the framework allows it. If required, we can source scaffolding and/or lifting vehicles for high glass installations.

Contact us

Cheltenham Glazing Testimonials

Customer Name: Mrs P M Booke.
I rang and spoke to a very pleasant gentleman who was extremely helpful and gave me information, cost and the main thing, when someone would come to see me. True to everything he said a very nice young man turned up within the time slot. His name was Robert Thompson he was extremely caring and he knew straight away what was wrong. Upon leaving he gave me his phone number and told me to contact him if need be. Needless to say I have not had to ring him because he seems to have done the right thing on it. It was a pleasure to have such a good workman in the house so polite etc. You have a very caring company and long may you continue.

Want to speak to an expert?
Call: 0800 051 8637

Example Of Our Glass Services

Cat & Dog Flaps
Given a sufficiently large pane of glass, we can manufacture and install a pane of glass, with a hole pre-cut for the flap. We cannot work on existing toughened glass (due to the high tension in the glass), any pressure applied to the glass would cause the destruction of the glass. It is possible to cut normal glass in situ, but as this is at the owner's own risk, it is not recommended. There must be a minimum clearance of 150mm between the edge of the glass, and the edge of the hole of the flap, so the glass is able to go through the toughening process and remain intact.

Book one of our experts, today

Click To Get a Free Quote

Calls made will not be charged

Top